A liquid oxidizer for explosives, comprising nitric acid, ammonium nitrate and water.
The idea is to balance those factors and intended results so that the liquid oxidizer can be mixed with other materials to form explosive and achieve the desired results, and to provide required (good) oxidizers for explosives. These and other objects are achieved by providing solution comprising of nitric acid, ammonium nitrate, and water. The liquid oxidizers by this method are solutions of nitric acid, ammonium nitrate, and water.
This oxidizer comprises of nitric acid, ammonium nitrate, and water in the proportions give below.
The nitric acid comprises preferably from about 30 to about 95 and in case of more it can be from 50 to 81 percent of the liquid oxidizer as per use. Nitric acid used in this method can be from 90-100% concentrated; this can also be changed as per for the use of oxidizer.
The ammonium nitrate constitutes from 5 to 40 and more can be from 10 to 30 wt percent of the liquid oxidizer.
The water comprises from about 8 to about 30 by weight percent of the liquid oxidizer. The water's salt content would also effect the composition as it may contain other unwanted salts, this may be solved by using clean and fresh water and if possible the water can also be filtered and distillated.
So at last we can make this oxidizer, so know what is it? It is the same thing say, which is put in black powder (it may be potassium or sodium nitrate), the thing is, it is modified and when used in the same way as they are. The thing will work better than the best.
Obviously and it is a fact that, other modifications and variations of the method can be done to make better thing out of it.
To the reader notice ammonium nitrate is highly explosive by its nature and made out of ammonium hydroxide and nitric acid, which is also used in this method. So it is be care full while handling such a thing. The concentrated nitric can also be replaced by the dilute one but then the thing will be that the water content must be reduced by the same proportion. And if possible the mixed acids can also be used for better results, i.e. to use mixture of nitric and sulphuric acids. This thing is always been is doubt that to use nitric as whole or with mixtures are good. For doing up such things the knowledge of those compounds are required
